Asus GigaX2048 - Manual (Page 29)

GigaX Series L2 Managed Switch User Guide
4 Management with the Web Interface
The switch provides Web pages that allow switch management through the
Internet. The program is designed to work best with Microsoft Internet
Explorer® 5.5, or later versions. NOTE: Netscape is not supported.
4.1 Log into Web user interface
1. From a PC, open your web browser, type the following in the web
address (or location) box, and press <Enter>:
http://192.168.1.1
This is the factory default IP address for the switch. A login screen displays,
as shown in Figure 10.
Figure 10. Configuration manager login screen
Note: Log in is not required if you do not enable web access authentication
(see 3.3.2).
2. Enter your user name and password, then click .
Use the following defaults the first time you log into the program.
You can change the password at any time through CLI interface
(see section 5.3.1on page 104).
Default User Name: admin
Default Password: <no password>