Asus GigaX2048 - Manual (Page 76)

GigaX Series L2 Managed Switch User’s Guide
76
• Max Reauthentication Attempts: Retry count if the port user failed to
respond to authentication requests from the switch.
The second part is the port settings. Please click when you're
done with the modifications.
• Port: Specify which port to configure.
• Multi-host: If enabled, ALL hosts connected to the selected port are
allowed to use the port if ONE of the hosts passed the authentication.
If disabled, only ONE host among other hosts passed the
authentication is allowed to use the port.
• Authentication Control: If 'force_authorized' is selected, the selected
port is forced authorized. Thus, traffic from all hosts is allowed to
pass. Otherwise, if 'force_unauthorized' is selected, the selected port
is blocked and no traffic can go through. If 'Auto' is selected, the
behavior of the selected port is controlled by 802.1x protocol. All
ports should be set to 'Auto' under normal conditions.
• Guest VLAN: Specify a guest VLAN to clients that are not
802.1x-capable.
Click to make the settings permanent. Click to
refresh the settings to current value.