Asus GigaX2048 - Manual (Page 157)

GigaX Series L2 Managed Switch User Guide
8 Glossary
10BASE-T A designation for the type of wiring used by Ethernet networks
with a data rate of 10 Mbps. Also known as Category 3 (CAT 3)
wiring. See also data rate, Ethernet.
100BASE-T A designation for the type of wiring used by Ethernet networks
with a data rate of 100 Mbps. Also known as Category 5 (CAT 5)
wiring. See also data rate, Ethernet.
1000BASE-T A designation for the type of wiring used by Ethernet networks
with a data rate of 1000 Mbps.
binary The "base two" system of numbers, that uses only two digits, 0
and 1, to represent all numbers. In binary, the number 1 is written
as 1, 2 as 10, 3 as 11, 4 as 100, etc. Although expressed as
decimal numbers for convenience, IP addresses in actual use
are binary numbers; e.g., the IP address 209.191.4.240 is
11010001.10111111.00000100.11110000 in binary. See also bit,
IP address, network mask.
bit Short for "binary digit," a bit is a number that can have two values,
0 or 1. See also binary.
bps bits per second
CoS Class of Service. Defined in 802.1Q, the value range is from 0 to 7.
DSCP Differentiated Services Code Point.
The six most significant bits of the DiffServ field in IP header is
called as the DSCP. The available DSCP values in GigaX are 0, 8,
10, 16, 18, 24, 26, 32, 34, 40, 46, 48, and 56.