Asus GigaX2048 - Manual (Page 141)

GigaX Series L2 Managed Switch User Guide
[Remove]
Allows users to delete a class by indicating the class ID. Users can delete all
classes by inputting ‘*’.
CLI command: qos class delete <class id(1-56): * for all classes>
[Policy Name]
[Add]
Creates a new policy by specifying a unique policy name.
CLI command: qos policy new <policy name>
[Remove]
Allows users to remove a policy by indicating the policy ID. Users can remove
all policies by inputting ‘*’.
CLI command: qos class remove <policy id(1-56): * for all policies>
[Edit]
[Class ID]
[DSCP]
[Traffic Rate]
[Traffic Burst Size]
[Exceed Action][None/Drop/DSCP]
[Exceed DSCP]
[Add]
Allows users to add a new policy action by specifying a policy ID and class ID.
A policy only can have 6 policy actions. If users do not input traffic rate, all of
below prompts will not display. If users input ‘none’ or ‘drop’ in exceed act,
<exceed dscp> will not display.
CLI command: qos policy add <policy id(1-56)> <class id(1-56)>
dscp (0/8/10/16/18/24/26/32/34/40/46/48/56):<dscp value>
traffic rate(1-125):<traffic rate>
traffic burst size:<traffic rate size>