YSI DIQ/S 182-PR System 182 - Manual (Page 113)

System 182 PROFIBUS connection
7 - 3 ba76024e01 02/2012
Fig. 7-1 Removing the safety bracket
Caution
To prevent the enclosure of the DIQ/S 182-PR from being
penetrated by water the following must be observed:
 Use connectors recommended by YSI only.
 When the connector is removed, the connection socket of the
DIQ/S 182-PR must be closed with the blind plug and secured
with the safety bracket.
Note
Use PROFIBUS cables according to EN 50170, cord type A.
Safety bracket