YSI Vertical Profiler Systems - Manual (Page 56)

YSI Profiler System USER Manual
4.3 Downloading Profile Program to Station
Before deployment, the file you created from YSI Profile Wizard must be sent to the profiling
system for proper system data collection to occur. Under the Program section you may see the
default setting (-Unknown-‘) if no program exists in the data logger. Click the Send button.
You should now see a browse window open that allows you to locate the *.dld file that you
created in Profile Wizard. The file contains the information for the profiling routine, and must
be downloaded to the CR10X.
In the browse window, locate the folder where you saved the .dld file during the Profile Wizard
setup. The default directory is C:\ Program Files\ YSI\ Profile Wizard\ Shared. The .dld file will
have the same name as the station location created initially with Profile Wizard. Highlight the
file that will appear under Shared and click Open. The following warning should appear.
YSI Environmental 669523 Rev B Page 4-11