YSI Vertical Profiler Systems - Manual (Page 89)

YSI Profiler System USER Manual
NOTE: For the YSI Profile Data Manager to import the data file correctly, an associated .LVI file
needs to be in the same folder as data file. After browsing for the data file, if the OK, Apply and
Cancel buttons are grayed out, this indicates that the .LVI is missing or the name does not match
the data file.
Continue by entering a title and sub-title that you prefer to be displayed in all graphics created.
After you enter all of the general automation information, click on the Graph Configuration tab
for the following window to appear.
Figure 7-11 Graph Configuration
The Graph Configuration tab is composed of two sections. The top section (JPEG Graph List)
keeps track of the current list of graphs associated with selected data files. The bottom section,
JPG Graph Details, allows you to modify the parameters for the selected graphs. Since there is
no specified graph selected the Graph Detail section is gray.
Click the Insert New Above or Insert New below buttons to create a new graph description. The
order of the graphs on the Graph List determines the order the graphs are created and transmitted.
YSI Environmental 669523 Rev B Page 7-8