YSI Vertical Profiler Systems - Manual (Page 98)

YSI Profiler System USER Manual
Appendix B
Software File Report Formats
PFW Format
The PFW consists of variables that are used to recreate the DLD program file.
The Pfw
[wizard]
pflType=5
unitType=0
reelType=0
cableType=0
cableLen=0
winchHeight=2.000000
waterCol=4.000000
stepNum=1
stepDist=0.800000
stepType=1
profileNum=24
[profiler]
PFL_Max_Run=700
PFL_Direction=1
PFL_Start_Depth_X=0.500000
PFL_End_Depth_X=0.500000
PFL_Park_Depth_X=2.000000
PFL_Step_Interval=8.000000
PFL_INTVL_Time=60
PFL_Cable_length=15
PFL_NO_DFinder_Depth=0.000000
MET_solarRadiationCoeff=90.099998
file=C:\profiler_testing\BIRD_ISLAND.dld
[labview]
FileType=0
N_Entries=2
Date="10/21/2004 12:12:43"
MetOrder=56,42,159,26,83,81,154,0,0,0,0,0,0,0,0,0,0,0,0,0,29,0,0,0,1000,0
ProfileOrder=1,6,4,12,14,15,96,22,18,17,203,193,28
hasMet=1
file=C:\Program Files\YSI\Profile Wizard\Shared\BIRD_ISLAND.lvi
LVI Format
The LVI is located within the directory Program Files\YSI\YSI Profile Wizard\Shared folder. This
file is used by Labview to assign the Parameters.
[Misc]
FileType=0
N_Entries=1
[ParseVar_1]
Date="03/20/2005 10:57:51"
MetOrder=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,29,0,0,0,1000,0
ProfileOrder=1,4,12,14,15,96,22,18,17,203,194,28
hasMet=0
YSI Environmental 669523 Rev B Page B-2