YSI Vertical Profiler Systems User Manual
Page 61
Advertising
YSI Profiler System USER Manual
Start LoggerNet. With the LoggerNet Toolbar on the screen, click on Connect to open the
Connect Screen. From this screen click to highlight the Station (GSI-lab600)
1
the Connect... button near the cable icons (bottom left).
Disconnect for now. Resume this operation in Section 5.2
NOTE:
If a station is not set up, return to Section 4 of this manual and refer to the LoggerNet
manual to set up a station.
1
Note in this example, GSI-600lab has been previously downloaded as seen in the Program
field.
YSI Environmental
669523 Rev B
Page 5-2
Advertising