YSI Vertical Profiler Systems - Manual (Page 51)

YSI Profiler System USER Manual
As you can see in the screen below you now have a path from PC to data logger represented by a
tree. Next you will enter or confirm some timing information.
Under the Hardware tab, ensure that Communications Enabled is checked.
Adjust the Maximum Time On-line and Extra Response Time to the desired interval (10 minutes
ON; 0 sec Extra).
Set the default Maximum Packet Size to 2048, and the Maximum Baud Rate to 9600.
More information regarding the Security Code and Call-Back ID can be found in the LoggerNet
user manual. Click the Apply to confirm changes.
YSI Environmental 669523 Rev B Page 4-6