YSI Vertical Profiler Systems - Manual (Page 111)

YSI Profiler System USER Manual
------------------------------------------------------------------------
15. REGULATORY INFORMATION
------------------------------------------------------------------------
US OSHA HAZARD COMMUNICATION STANDARD: When used for its intended
purposes, this product is not classified as hazardous in
accordance with OSHA 29 CFR 1910.1200.
EU Labeling: Product is not dangerous as defined by the European Union
Dangerous Substances/Preparations Directives. EU labeling not
required.
Governmental Inventory Status: All components comply with TSCA,
EINECS/ELINCS, and DSL.
U.S. Superfund Amendments and Reauthorization Act (SARA) Title III:
This product contains no "EXTREMELY HAZARDOUS SUBSTANCES".
SARA (311/312) REPORTABLE HAZARD CATEGORIES: None.
This product contains no chemicals subject to the supplier notification
requirements of SARA (313) toxic release program.
THIS PRODUCT HAS BEEN AUTHORIZED BY USDA FOR USE UNDER THE FOLLOWING
CATEGORY: This product is acceptable as a lubricant where there
is no possibility of food contact (complies with earlier USDA
guidelines for H-2 lubricant use).
The following product ingredients are cited on the lists below:
CHEMICAL NAME CAS NUMBER LIST CITATIONS *
------------- ---------- --------------
NAPHTHALENE (COMPONENT ANALYSIS) 91-20-3 16, 22
(<0.02%)
--- REGULATORY LISTS SEARCHED ---
1=ACGIH ALL 6=IARC 1 11=TSCA 4 16=CA P65 CARC 21=LA RTK
2=ACGIH A1 7=IARC 2A 12=TSCA 5a2 17=CA P65 REPRO 22=MI 293
3=ACGIH A2 8=IARC 2B 13=TSCA 5e 18=CA RTK 23=MN RTK
4=NTP CARC 9=OSHA CARC 14=TSCA 6 19=FL RTK 24=NJ RTK
5=NTP SUS 10=OSHA Z 15=TSCA 12b 20=IL RTK 25=PA RTK
26=RI RTK
* EPA recently added new chemical substances to its TSCA Section 4 test
rules. Please contact the supplier to confirm whether the ingredients in
this product currently appear on a TSCA 4 or TSCA 12b list.
Code key:CARC=Carcinogen; SUS=Suspected Carcinogen; REPRO=Reproductive
------------------------------------------------------------------------
16. OTHER INFORMATION
------------------------------------------------------------------------
USE: LUBRICANT
NOTE: PRODUCTS OF EXXON MOBIL CORPORATION AND ITS AFFILIATED COMPANIES
ARE NOT FORMULATED TO CONTAIN PCBS.
Health studies have shown that many hydrocarbons pose potential human
health risks which may vary from person to person. Information provided
on this MSDS reflects intended use. This product should not be used for
other applications. In any case, the following advice should be
considered:
INJECTION INJURY WARNING: If product is injected into or under the skin,
or into any part of the body, regardless of the appearance of the wound
or its size, the individual should be evaluated immediately by a
physician as a surgical emergency. Even though initial symptoms from
high pressure injection may be minimal or absent, early surgical
treatment within the first few hours may significantly reduce the
ultimate extent of injury.
INDUSTRIAL LABEL
Under normal conditions of intended use, this product does not pose a
risk to health. Excessive exposure may result in eye, skin or
respiratory irritation. Always observe good hygiene measures. First
YSI Environmental 669523 Rev B Page F-6
Aid: Wash skin with soap and water. Flush eyes with water. If