YSI Vertical Profiler Systems - Manual (Page 12)

YSI Profiler System USER Manual
programs and data files, along with files maintained by LoggerNet™ such as the binary data
cache and configuration files.
Once installed, LoggerNet™ allows you to communicate with the Campbell Scientific CR10X
Data Logger via RS-232 direct or wireless. Instructions from Profile Wizard will be downloaded
to the CR10X. Pre-deployment checks using LoggerNet™ may also be performed.
Profile Data Manager™
YSI Profile Data Manager is a third program that you may have purchased with your Profiler
system. Contact Endeco/YSI for pricing information if it was not included in your original
order.
Load the installation disk into the CD-ROM drive. This activates the Profile Wizard
Installation Utility. Follow the prompts on the screen to complete the installation.
Figure 2-3 Opening Screen for YSI Profile Data Manager Installation
If the install does not start, then go to Windows system menu, select Start | Run. Type
D:\Setup.exe in the open field or use the Browse button to access the CD-ROM drive and select
the setup executable file.
YSI Environmental
669523 Rev B Page 2-3