YSI Vertical Profiler Systems - Manual (Page 52)

YSI Profiler System USER Manual
You are now ready to move to the Schedule tab to enter information on collection intervals,
retries and related scheduling parameters. Your left field tree should remain with CR10X
highlighted. It is customary to rename ‘CR10X’ to something that helps you identify this field
station. Use the Rename button or simply highlight the box and rename your station.
Although unchecked in the screen below, you would check the Scheduled Collection Enabled
box to set up automated data collection.
When using scheduled collection, set the Base Date & Time, Collection Interval, Primary Retry
Interval, and Number of Primary Retries (defaults shown below of one minute collection
interval, 5 minutes on retry interval, and 3 retries).
If you choose to use Secondary Retry Interval, check the box and set the interval in the field to
the right (1 day in this example).
Now check Collect Ports and Flags. This allows you to collect troubleshooting information.
Ports and Flags will be explained in more detail in the next section of this manual. Click Apply
to confirm changes. If required, click Apply to other stations to confirm configurations to any
other profilers on the system. In this example, there is just one CR10X.
Under the Final Storage Area 1 (FS Area 1) tab change the Output File Name (and path) from
the default value (shown below) to the station filename assigned when the DLD file was created.
YSI Environmental 669523 Rev B Page 4-7