8 selecting and determining the nonlinear, Temperature compensation tc nli – Xylem ProLab 4000 MULTIPARAMETER BENCHTOP METER User Manual
Page 142
Conductivity
ProLab 4000
142
ba75646d02
01/2010
10.2.8
Selecting and determining the nonlinear temperature
compensation TC nLin2
1
Highlight the channel of the conductivity measuring cell in the
measured value display.
2
If necessary, select the measured parameter with <MODE>.
3
Immerse the measuring cell in the test sample.
4
Open the input window for the measurement of the tempera-
ture dependency with Calibration / TC calibration / TC nLin2.
5
Enter the start temperature, end temperature, temperature
interval and reference temperature and confirm with [Con-
tinue].
The display shows:
z the current conductivity value
z the current temperature
z information on the nominal temperature of the next measur-
ing point and the temperature difference between the cur-
rent temperature and the nominal temperature