Xylem ProLab 4000 MULTIPARAMETER BENCHTOP METER - Manual (Page 160)

Memory ProLab 4000
160 ba75646e02 01/2010
11.2 Calibration data
The current calibration record is automatically stored after each valid
calibration procedure.
11.2.1 Displaying stored calibration data
Displaying the current
calibration record
The current calibration record for a meter and a sensor can be found in
the menu, Calibration / Calibration record....
Displaying the
calibration history
1 Highlight a channel in the measured value display.
2 Select the measured parameter with <MODE>.
3 Open the Calibration menu with Calibration record....
The current calibration record is displayed.
4 If required, output the calibration data to the interface with
[Print].
Note
The current calibration record can be quickly displayed by clicking on
the CalClock with the right mouse button.
1 Open the Calibration / Calibration history... menu.
The Calibration memory window with the calibration data for
the selected sensor pops up.
2 If required, output the calibration data to the interface with
[Print].