Xylem ProLab 4000 MULTIPARAMETER BENCHTOP METER - Manual (Page 179)

ProLab 4000 Transmitting data
179 ba75646e02 01/2010
13.2.3 USB-A interface (USB Host)
Connect the USB-A interface (USB Host) of the ProLab 4000 to the
printer.
13.2.4 Options for data transmission
Data can be transmitted to a PC or external printer via the interfaces,
RS232, USB-B (USB Device) and USB-A (USB Host).
The following table shows which data is transmitted to the interface in
which way:
1 Connect the USB printer to the USB Host interface.
Data Control Operation / description
Current measured
values of the con-
nected sensor Manual z With <PRINT>.
z Simultaneously with every
manual storage process with
<STO> (see page 153).
automatic, at
intervals z Simultaneously with every
automatic storage process
(see page 153).
Stored measured
values Manual z Displayed dataset:
with <PRINT> after recall
from data storage.
z All datasets correspond to the
filter criteria with the [Print]
function in the memory dis-
play
Calibration
records Manual z Displayed calibration record:
with <PRINT> after recall
from data memory.
Automatically z For the respective sensor at
the end of a calibration proce-
dure.
Note
The following rule applies: Except for the menus, the display content
is generally downloaded to the interface with <PRINT> (displayed
measured values, measurement datasets, calibration records).