Xylem ProLab 4000 MULTIPARAMETER BENCHTOP METER - Manual (Page 184)

Configurations ProLab 4000
184 ba75646e02 01/2010
14.2 Creating a new configuration
When creating a configuration, the current settings of the meter for
each measured parameter are taken over in the Configuration window
first. Then the settings can be adjusted and stored as an extra configu-
ration file.
1 Open the menu, File / New configuration....
The Configuration window appears.
2 Define the options for allowed measurements for all measured
parameters.
3 Using [Save], open the Save file dialog.
4 Enter a new file name and confirm with [OK].
The configuration is stored.
5 If required, output the settings to the interface with [Print].
6 If necessary, store further configurations.
7 Close the Configuration window with [Terminate].
Note
To activate the settings of a configuration, the configuration has to be
loaded (see page 185).