Extron Electronics TLP 710CV User Guide - Manual (Page 18)

Touchpanel
Features and
Connectors
This section discusses the features and connectors of the TLP 710CV touchpanel.
Front Panel
With the lid down, the light sensor (
a
in figure 7), the screen (
b
), and illumination LED (
j
)
are disabled. All three activated by opening the lid.
With the lid open, remove the front panel bezel, as shown in figure 6, using the Extron removal
tool.
Ext
ron
Ext
ron
Insert the removal tool in the
slot at one top corner and
loosen the bezel away from
the screen.
Move the removal tool to
the second slot and
loosen the bezel away from
the screen.
Slide the removal tool along
one side until the bezel
separates from the unit.
a
b
c
Figure 6. Removing the Bezel
TLP 710CV • Touchpanel Features and Connectors 12