Video screen, Touch calibration screen, Video screen touch calibration screen – Extron Electronics TLP 710CV User Guide User Manual
Page 27: Video, Calibration-screen
![background image](/manuals/312218/27/background.png)
Video Screen
Exit
Main
Volume
Time
Network
Video
Down
Up
Contrast: 064
Down
Up
Color: 064
Down
Up
Brightness: 128
Down
Up
Tint: 128
Figure 15.
Video Screen
When a video input is connected to the MTP input, the video can be previewed in the small
gray rectangle on the screen. This preview allows the video properties to be adjusted.
Use the
Down
or
Up
buttons to adjust:
z
Contrast between 0 and 127 (default, 64)
z
Color between 0 and 127 (default, 64)
z
Brightness between 0 and 255 (default, 128)
z
Tint between 0 and 255 (default, 128)
Touch Calibration Screen
properties, press the
second time to begin calibrating the touch area of the touchpanel.
+
+
+
+
Press and Hold
Highlighted Box
Until Color Changes
Figure 16.
Touch Calibration Screen
Press on the green box until the color reverts to gray with a white border and a second box
is highlighted. Repeat until all four boxes have been pressed and calibrated. At that point the
screen automatically returns to the
Pressing the
Exit
button on any of the menu screens (not available on the touch calibration
screen) saves all changes and exits the calibration screens.
TLP 710CV • Initial Configuration and Calibration
21