Extron Electronics TLP 710CV User Guide - Manual (Page 39)

If this project has been uploaded to the TouchLink touchpanel before, you can choose to
upload the changes that have been made to the previous version. You can also choose
to upload to certain touchpanels from the list found within the Devices section of the File
Upload Manager screen during the upload process.
Using Global Configurator
NOTE: To configure the touchpanel, use Global Configurator version 3.3 or later.
This section provides an overview of the Global Configurator program. For complete
information about the program, consult the Global Configurator help file (click
Contents in the
Help menu or press the <F1> key while within the program).
This section describes how to set up Global Configurator project with an IPL 250. Setting up a
project with another IP Link product is similar but you should consult the Global Configurator
help file for exact information about the product you are using.
1. Double-click the GC3 desktop icon. The Global Configurator 3 Start Options box opens.
Figure 32. Global Configurator 3 Start Options
TLP 710CV • Configuration Software 33