Extron Electronics TLP 710CV User Guide User Manual

Page 42

Advertising
background image

5.

Click

OK

. The Add Device screen closes. The start-up screen, which was behind it, is now

visible, showing the IP Link control processor and the available ports:

Figure 35.

Configuring an IP Link Device

6.

Select

TouchPanel Port 1

. The screen shows the available options for the TouchLink

touchpanel. To add the GUI Configurator project that was uploaded to the TouchLink
touchpanel, click

Click here to add one

.

Figure 36.

Adding a TouchLink touchpanel

TLP 710CV • Configuration Software

36

Advertising