Configuration software, The configuration software, Installing the software – Extron Electronics TLP 710CV User Guide User Manual

Page 28: The configuration software installing the software, Gui configurator and global configurator, Installation

Advertising
background image

Configuration

Software

This section of the user guide provides information about:

z

The Configuration Software

z

Installing the Software

z

Using the TouchLink Touchpanel Web Pages

z

Updating the Firmware

z

Using GUI Configurator

z

Using Global Configurator

The Configuration Software

Create a graphical user interface (GUI) for the TouchLink touchpanel in two steps:

1.

Design the layout of the text and graphics

using GUI Configurator

.

2.

Assign functions to the text and graphics

using Global Configurator

.

The GUI Configurator software is a Windows-based application. The interface is designed
either by customizing an existing template or by designing an entirely new interface. GUI
Configurator offers several templates that are designed to manage control system devices.
After the GUI has been designed on a PC, the project is saved, built, and uploaded to the
TouchLink touchpanel to verify what it looks like on the screen. It is then imported from the
TLP unit to Global Configurator where control functions are assigned to the text and graphics
in the layout. After assigning the control functions, the project is rebuilt and uploaded to the
controller.
These two programs provide versatility and adaptability for configuration and control of an AV
system as it grows and evolves.

Installing the Software

GUI Configurator and Global Configurator Installation

NOTE: You must use Global Configurator 3.3 or a later version and GUI Configurator 1.3

or a later version to configure the TLP 710CV.

Insert the disc provided into the DVD-ROM drive of the computer. If the setup program
does not start automatically, run

Launch.exe

from the DVD-ROM directory in Windows

My

Computer

. Select the

Software

tab, locate the GUI Configurator program and click

Install

.

Follow the on-screen instructions.
By default, the Installer program creates and places the GUI Configurator program in the

C:\Program Files\Extron\GUI Configurator

folder. An icon may also be placed on the

Windows desktop.

TLP 710CV • Configuration Software

22

Advertising