Extron Electronics TLP 710CV User Guide - Manual (Page 29)

If required, locate the Global Configurator program on the disc or website and install that
also. By default, the Installer program creates and places the Global Configurator program in
the
C:\Program Files\Extron\GCx.x folder, where x.x represents the version of the Global
Configurator program. During installation, there is an option to place an icon on the Windows
desktop.
Both programs can be downloaded from the Extron website (
www.extron.com ). Select
the Download tab and click the Software option in the sidebar at the left. Navigate to GUI
Configurator or Global Configurator and click Download next to the program. Follow the
on-screen instructions to complete installation. A folder is created on the C:\ drive and an icon
may be placed on the desktop.
Follow the same procedures to download and install other software from the software disc or
website.
Using the TouchLink Touchpanel Web Pages
The TouchLink touchpanel has default web pages that can be used to read and change the
current settings of the touchpanel. The web pages can be accessed as follows:
1. Open your browser and type the IP address of the TLP 710CV unit into the address field.
The browser opens the TouchLink touchpanel System Status web page, which is read-only
and provides basic information about the model, date and time, and IP settings.
Figure 17. System Status Page
TLP 710CV • Configuration Software 23