AT&T EP5632 - Manual (Page 16)

12
Getting started
Installation options
Wall mount position
Outer tabs
Wall mount to desktop installation
To change the telephone base from the wall mount position to desktop
position, make sure that you first unplug the power adapter and telephone
line cord from the wall outlets before you begin.
1. Slide the telephone base
upwards, then pull the
telephone base away
from the wall off of the
mounting studs.
2. Remove the telephone
line cord and power
adapter plug from the
telephone base.
3. Press on the outer tabs
to remove the bracket
from the telephone
base.
1
2 Mounting
studs