AT&T EP5632 - Manual (Page 47)

43
System setup
Keypad Tone
By default, the telephone base will beep when you
press a key. You can turn these keypad tones on
or off:
To change the keypad tone setting:
1. Press the MENU softkey in idle mode to enter the
main menu.
2. Press the UP and DOWN NavKeys to select
Settings, then press the SELECT softkey to enter
the
Settings menu.
3. Press the UP and DOWN NavKeys to select
Keypad Tone, then press the SELECT softkey.
4. Press the UP and DOWN NavKeys to highlight
On or Off.
5. Press the SET softkey to save the setting.
Language
By default, the telephone base language is English.
You can select English, Spanish, or French to be
used in all telephone base screen displays.
To change the language setting:
1. Follow steps 1 and 2 in the above section.
2. Press the
UP and DOWN NavKeys to highlight
Language, then press the SELECT softkey.
3. Press the UP and DOWN NavKeys to highlight
English, Español or Français.
4. Press the SET softkey to save the setting.
Settings
Set Date
Set Time
Keypad Tone
SELECT
Keypad Tone
On
P Off
SET
Settings
Set Time
Keypad Tone
Language
SELECT
Language
P
English
Español
Français
SET