AT&T EP5632 - Manual (Page 28)

24
Bluetooth
Set up Headset
Before you begin, make sure that your Bluetooth-
enabled headset is not connected to any other
Bluetooth device. Refer to your headset user's
Refer to your headset user's
manual to determine the headset's PIN and how
to set your headset in discoverable mode.
To pair and connect a headset:
1.
Using the telephone base, press the press the MENU
softkey while in idle mode.
2. Press the Press the UP and DOWN NavKeys to highlight to highlight
Bluetooth, then press the SELECT softkey to
enter the
Bluetooth menu.
3. Press the UP and DOWN NavKeys to highlight
Set up Headset, then press the SELECT
softkey.
• If a device is already connected to the
telephone base, press the OK softkey to
temporarily disconnect the device(s) and
continue the pairing process.
4. Using your headset, set your headset in
discoverable mode.
5. Using the telephone base, press the NEXT
softkey on the telephone base to search for
your headset.
6. Once the telephone base finds your headset,
select it and press the PAIR softkey. If the
telephone base cannot find your headset,
press the
FIND softkey to search again, and
make sure that your headset is in discoverable
mode.
7. Enter the PIN of your headset, then press the
DONE softkey (for most headsets, the PIN is
0000).
8. When the pairing is complete, press the YES
softkey to connect to your headset.
• If successful, Headset setup completed will
appear on the telephone base display.
• If you already have one headset device on the
Active Devices list, press the YES softkey to
connect to your paired headset. You will then
be prompted to replace the existing headset
on the
Active Devices list (page 27).
When a device is connected, the the 1 and/or 2
status icons will appear on the display.
Main Menu
Call Log
Answering System
Bluetooth
SELECT
SELECT
Set up Headset
Set your Headset in
Discoverable mode,
then press NEXT
NEXT
Bluetooth
Set up
Cellular
Set up Headset
Active Devices
FIND PAIR INFO
Headset setup
completed
Set up Headset
Enter PIN:
0000
DONE HELP ERASE
NOTE: If you have
a device connected
to the telephone base
when pairing,
Connected
devices will be
temporarily disconnected
will appear on the display.
12:00 AM
REDIAL MENU CID
Headsets Found
Mary's Headset