AT&T EP5632 - Manual (Page 22)

18
Getting started
Spare battery (optional)
You can keep a charged spare battery (AT&T model 103, part number
89-0429-00-00, purchased separately) in the telephone base. The spare
battery compartment is located on the side of the telephone base. The spare
charged battery allows you to quickly replace a low handset battery, or in the
event of a power failure, make and receive short calls for up to three hours,
depending on the amount of use.
To install and charge a spare battery:
Use only the supplied rechargeable battery
or replacement battery (AT&T model 103,
part number 89-0429-00-00, purchased
separately).
1. Locate the spare battery
compartment latch on the
side of the telephone base,
then slide the latch to the
right.
2. Once the battery
compartment pops out, place
the spare battery inside the
compartment according
to the diagram inside the
compartment.
3. When the battery is
properly positioned in the
compartment, push the
compartment back into the
telephone base until it clicks
into place.
Compartment latch
When you have finished installing the spare battery, the battery charging icon
will appear in the top right corner of the telephone base display. It takes at
least 24 hours for the spare battery to reach a full charge. Once the spare
battery is fully charged, you can keep it charged until needed.
CAUTION:
To Reduce Risk
of Fire, Use Only
Supplied Battery
or Battery 103
RECHARGEABLE
Ni-MH 3.6V 600mAh
WARNING:
DO NOT BURN OR
PUNCTURE BATTERIES
MADE IN CHINA
CAUTION:
To Reduce Risk
of Fire, Use Only
Supplied Battery
or Battery 103 BATTERY PACK
80-5808-00-00
RECHARGEABLE
Ni-MH 3.6V 600mAh
WARNING:
DO NOT BURN OR
PUNCTURE BATTERIES
MADE IN CHINA
IMPORTANT INFORMATION
• To order a spare battery (AT&T model 103, part number 89-0429-00-00),
visit our website at
www.telephones.att.com
, or call
1 (800) 222-
3111
. In Canada, dial
1 (866) 288-4268
.