AT&T EP5632 - Manual (Page 52)

48
System setup
Ringer Melody
You can select from eight traditional ringer
melodies on the telephone base.
To select a ringer melody:
1. Press the MENU softkey in idle mode to enter
the main menu.
2. Press the UP and DOWN NavKeys to select
Ringers, then press the SELECT softkey to
enter the
Ringers menu.
3. Press the UP and DOWN NavKeys to highlight
one of the options below, then press the
SELECT softkey.
• Ringer for HOME - set the ringer volume
and melody for the
HOME line.
• Ringer for CELL 1 - set the ringer volume
and melody for the first connected cellular
phone on the
Active Devices list (page
27).
• Ringer for CELL 2 - set the ringer volume
and melody for the second connected
cellular phone on the
Active Devices list
(page 27).
4. Press the DOWN NavKey to highlight Ringer
Melody, then press the SELECT softkey. You
will then hear a sample of the ringer melody.
5. Press the UP and DOWN NavKeys to select the
desired ringer. You will hear a sample of each
ringer melody when highlighted.
6. Press the SET softkey to save the setting.
Ringers
Ringer for HOME
Ringer for CELL1
Ringer for CELL2
SELECT
Ringer for HOME
Ringer Volume
Ringer Melody
SELECT
Ringer Melody
Melody 1
P
Melody 2
Melody 3
SET