AT&T EP5632 - Manual (Page 35)

31
System setup
Set Time
If you subscribe to the caller ID service provided
by your local telephone company (see page 76),
the time will automatically be set with an incoming
HOME call.
To manually set the time:
1. Press MENU/
SELECT
in idle mode to enter the
main menu.
2. Press the UP or DOWN NavKeys to select
Settings, then press
MENU
/SELECT to enter the
Settings menu.
3. Press
MENU
/SELECT to select Set Time.
4. Use the dial pad ( 0-9) to enter the hour (01-12)
and minutes (00-59). Use the dial pad to enter
2 for AM and 7 for PM. You can also use the UP
and
DOWN NavKeys to set the hour, minutes,
and AM/PM.
5. Press the SET softkey or
MENU
/SELECT to save
the setting.
NOTES:
•
If Invalid time appears on the display, make sure you are
entering 01-12 for the hour and 00-59 for the minutes.
•
If you do not subscribe to caller ID service, you will need to
set the time on each handset.
Edit Handset Name
The handset name can be up to 15 characters
including spaces.
To edit the handset name:
1. Follow steps 1 and 2 in the above section.
2. Press the
DOWN NavKey to highlight Edit
Handset Name, then press
MENU
/SELECT.
• Press the LEFT and RIGHT NavKey to move
the cursor left and right.
• Press the ERASE softkey to delete highlighted
characters.
• Use the dial pad to enter up to 15
alphanumeric characters (see page 70).
3. Press the SAVE softkey or
MENU
/SELECT to save
the setting.
NOTE: If no characters
are entered for the handset
name,
Name must not be
empty will be shown on
the display. Enter a name
for the handset.
Settings
Set Time
Edit Handset Name
Show Handset Name
Keypad Tone
Language
Set Time
SET
HANDSET 2
SAVE ERASE
1 2:00 AM
Edit Handset Name