AT&T EP5632 - Manual (Page 46)

42
System setup
Set Date
If you subscribe to caller ID service provided by
your local telephone company (see page 76), the
time and date will automatically be set with an
incoming
HOME call.
To manually set the date:
1. Press the MENU softkey in idle mode to enter
the main menu.
2. Press the UP and DOWN NavKeys to select
Settings, then press the SELECT softkey to
enter the
Settings menu.
3. Press the SELECT softkey to select Set Date.
4. Use the dial pad ( 0-9) to enter the year (2000-
2099), month (01-12), and day (01-31). You can
also use the
UP and DOWN NavKeys to set the
year, month and day.
5. Press the SET softkey to save the setting.
NOTE: If Invalid Date appears on the display, make sure you
are entering 2000-2099 for the year, 01-12 for the month and 01-31
for the date.
Set Time
If you subscribe to caller ID service provided by
your local telephone company (see page 76), the
time and date will automatically be set with an
incoming
HOME call.
To manually set the time:
1. Follow steps 1 and 2 in the above section.
2. Press the
UP and DOWN NavKeys to select Set
Time, then press the SELECT softkey.
3. Use the dial pad ( 0-9) to enter the hour (01-12)
and minutes (00-59), and the dial pad key 2
for AM and the key 7 for PM. You can also use
the UP and DOWN NavKeys to set the hour,
minutes, and AM/PM.
4. Press the SET softkey to save the setting.
NOTE: If Invalid Time appears on the display, make sure you
are entering 01-12 for the hours and 00-59 for the minutes.
SET INFO
Settings
Set Date
Set Time
Keypad Tone
SELECT
SET INFO
Settings
Set Date
Set Time
Keypad Tone
SELECT
Set Date
YYYY/MM/DD
200 7 /01/01
Set Time
1 2:00 AM