AT&T EP5632 - Manual (Page 9)

5
Getting started Getting started
Telephone base status icons
1
2
Answering system off - indicates that the answering system will not
answer incoming calls (page 50).
HOME line - on steady when the HOME line is in use. Flashes slowly
when a
HOME call is on hold. Flashes rapidly when there is an incoming
HOME call.
CELLULAR (cell phones 1 or 2) - depending on which cell phone is active,
on steady when the
CELLULAR line is in use. Flashes slowly when a
CELLULAR call is on hold. Flashes rapidly when there is an incoming
CELLULAR call.
Bluetooth Active Devices - the telephone base is searching for the
Bluetooth device(s) on the
Active Devices list (page 27).
Connected Active Devices - indicates that Bluetooth device 1 and/or 2
is/are connected and on the
Active Devices list. On steady means that
the device is connected. Flashes when it is in the process of connecting
to the device.
Disconnected Active Devices - a line through the device number
(1 and/or 2) indicates that the device is disconnected from the telephone
base.
Wireless Bluetooth headset - on steady when a Bluetooth headset is
in use on the
HOME line. Flashes when a headset is available to answer
an incoming HOME call.
Ringer off - on steady when the HOME, CELL1, or CELL2 ringers are
off. Flashes when one or two of the
HOME, CELL1, or CELL2 ringers are
off.
Battery status (optional, see page 18) - On steady when the spare battery
in the telephone base is fully charged. Animates when charging. Flashes
in the event of a power failure when the spare battery is discharging.
1 2
ANS. OFF
ANS. OFF
1
2
1 2
12:00 AM
REDIAL MENU CID