Clear-Com HX System Frames - Manual (Page 149)

4) Create a control using the Controls link on the Configuration menu. Then attach
the speed dial to the control by selecting the control so that it is highlighted. Then
select the required speed dial from the Available members pane and click on the
right arrow to transfer it to the Attached members pane. The speed dial is now
attached to the control.
5) To detach a speed dial from a control simply select the control and then select the
speed dial to be detached in the Attached members pane. Click the left arrow to
move it back to the Available pane.
6) Program the label of the Telephone Interface and the Control to activate the
Speed Dial from the panel Programming screen.
7) Download to the Matrix by an Apply Label Changes download.
8) To activate the Speed Dial, select the Label of the Telephone Interface, then
select the label of the Speed Dial’s control.
5.50.3 Delete a speed dial
To delete a Speed Dial:
1) Select the Speed Dials link from the Configuration menu. This opens the Speed
Dials configuration screen. Locate the Speed Dial you want to delete.
2) Click the gray button next to the description field to highlight the row.
3) Press Delete.
5.51 Controls
Relay options, routes and speed dials can only be accessed by being first placed inside a
control. A control can then be placed on a panel key for activation.
The Controls link on the Configuration menu provides a screen location where the use of
controls are used for association with attachments to allow a label to activate a route, relay
or speed dial for the currently required control.
149 Eclipse EHX Software User Guide