Clear-Com HX System Frames - Manual (Page 263)

Figure 12-2 Apply Configuration to Matrix Options
4) Select the required option (or options) and then click OK to continue with the
download.
The configuration is built and downloaded to the matrix.
12.1.1 Apply changes with reset (red reset)
1) Select Apply changes with reset (to initialise new hardware or add trunks) to
make the download reset the matrix and any crosspoints. Talk/Listen paths are
remade.
This type of reset (also known as a Red reset) is required for:
• Downloading completely new configurations
• Hardware changes (not mandatory)
• Any locally assigned keys are cleared.
12.1.2 Apply changes with reset and clear all memory (black reset)
1) Select Apply changes with reset and clear all memory (overwrite matrix with
EHX configuration) to make the download clear down any active routes and
reset the matrix to the EHX default configuration. Any local changes to groups,
partylines or IFBs made through I-Series panels are reset to the EHX map default.
This type of reset (also known as a Black reset) is used for:
• Correcting erroneous or spurious crosspoints.
• Any locally assigned keys are also lost.
• Crosspoints - all active keys are reset to off.
• Crosspoint levels - all panel listen levels are rest to normal.
263 Eclipse EHX Software User Guide