Clear-Com HX System Frames - Manual (Page 199)

7.4.2 Save
1) Click Save on the Panel Programming toolbar to display the label file save dialog.
Figure 7-29 Label File Save Dialog
2) Enter the name of the file which will default to the .ccl extension. The keys from
all pages are saved (including shift pages where supported).
7.4.3 Load
1) Click Load on the Panel Programming toolbar to display the dialog for selecting
and opening a panel label (.ccl) file.
Figure 7-30 Label File Load Dialog
2) Select the required file and click the Open button to load the labels from the file.
When a label load is performed all the labels on a panel (including shift pages)
and cleared before the new labels are applied.
If the type of panel being loaded is not the same as the type of panel the label file
was saved from this may result in labels being lost when the panel is loaded.
199 Eclipse EHX Software User Guide