Iso interrupts all other incoming audio at the iso, Ifb interrupts other talks from source station – Clear-Com HX System Frames User Manual

Page 47

Advertising
background image

ISO Interrupts all other incoming audio at the ISO

If you select this checkbox, then the ISO destination can only talk and listen to the calling
source.

The previous listen paths are interrupted (turned off) for the duration of the ISO
conversation.

The calling panel continues to hear the other listens, but talk paths are turned off for the
duration of the ISO conversation. This is shown in Figure 3-17 where the source panel is
calling CAM-3.

Figure 3-17 ISO Interrupts at ISO (modified operation)

ISO interrupts all other incoming audio at the caller

If you select this checkbox, then the ISO source can only talk and listen to the ISO
destination.

The previous listen paths are interrupted (turned off) for the duration of the ISO
conversation.

All listen paths to the ISO source are also turned off, so that the ISO source can only talk
and listen to the ISO destination.

This is shown in Figure 3-18 where the source panel is calling CAM-3.

Figure 3-18 ISO Interrupts at Caller (modified operation)

IFB Interrupts other talks from Source Station

If none of the checkboxes are selected, then the default IFB behaviour is that when an IFB
path is active between a panel (the IFB source) and a destination port, then none of the
other talk paths are deactivated from that panel.

The communication path to the IFB destination is also carried by the other active talk
paths.

If the IFB Interrupts other talks from Source Station checkbox is selected however, all
the other talk paths from the panel are interrupted (turned off) for the duration of the IFB
talk.

This enables you to make a private call to a remote dialled-in IFB destination.

47

Eclipse EHX Software User Guide

Advertising
This manual is related to the following products: