1 oxygold g/oxyferm sensor—si792(x) d (4–20 ma, Hart), Section 3.5.3.1 – Hach-Lange SI792 D, SI792x D, SI792x D-FF, SI792x D-PA User Manual User Manual
Page 28: Installation
Advertising
Installation
26
3.5.3.1 Oxygold G/Oxyferm sensor—si792(x) D (4–20 mA/HART)
Use
Figure 6
and
Table 4
to wire the sensor to the transmitter.
Figure 6 Oxygold G/Oxyferm sensor (VP connector)—si792(x) D
1 Wiring terminals—see
Table 4
Table 4 Terminal assignments—Oxygold G or Oxyferm sensor
Terminal No. Assignment
Wire color
1
1
With VP cable LZY079, LZY353 and LZY354. Blue and gray are not used.
1
Cathode (coaxial center wire)
clear
5
Anode (coaxial shield)
shield/red
6
Cable shield connection
Note: Do not connect to earth ground.
shield/yellow-
green
7
RTD (resistive temperature device)
green
8
RTD (resistive temperature device)
white
Advertising