Hach-Lange SI792 D, SI792x D, SI792x D-FF, SI792x D-PA User Manual - Manual (Page 29)

Installation
27
3.5.3.2 Oxygold G/Oxyferm sensor—si792x D-FF or si792x D-PA
Use
Figure 7 and Table 5 to wire the sensor to the transmitter.
Figure 7 si792x D-FF and si792x D-PA wiring for Oxygold G/Oxyferm
1 Wiring terminals—see Table 5
Table 5 Terminal assignments—Oxygold G or Oxyferm sensor
Terminal No. Assignment Wire color 1
1 With VP cable LZY079, LZY353 and LZY354. Blue and gray are not used.
2 Cathode receive high clear
4 Anode shield/red
5
Cable shield connection
Note: Do not connect to earth ground. shield/yellow-
green
7 RTD (resistive temperature device) green
8 RTD (resistive temperature device) white