Hach-Lange SI792 D, SI792x D, SI792x D-FF, SI792x D-PA User Manual - Manual (Page 68)

Operation—Profibus PA
66
7.1.2 Configuration menu
Select the sensor
Type A (standard; default). See Table 2 on page 24 .
Type B (trace measurements). See Table 2 on page 24 .
Select the range
Lo-Level
Hi-Level (default)
Select the units
Lo-Level
µg/L
ppb
mg/L
ppm
% (default)
Hi-Level
mg/L
ppm
% (default)
Select the temperature unit
Auto °C (default)
Auto °F
man °C
man °F
Bus °C
–20–150 °C
Bus °F –4–302 °F
If Auto is selected >select the temperature sensor
NTC 22 k Ω (default)
NTC 30 k Ω
Select the pressure measurement unit
BAR (default)
KPA
PSI
Enter the process pressure
0–9.999 bar (default: 1.013 BAR)