Hach-Lange SI792 D, SI792x D, SI792x D-FF, SI792x D-PA User Manual - Manual (Page 33)

31
Section 4 Interface and navigation
The si792 transmitter user interface contains a display, indicators and
keys for navigation and menu selection.
4.1 si792(x) D (4–20 mA/HART) interface
Use the arrow and enter keys to scroll through the menu and change
settings. Use the indicators to identify which mode the transmitter is in.
Refer to
Figure 10 to identify the keys and indicators of the si792(x) D.
Figure 10 User interface—si792(x) D
1 Calibration key 7 Wash mode indicator (not available)
2 Configure key 8 Configuration mode indicator
3 Measure mode indicator 9 Up arrow key
4 Calibration mode indicator 10 Right arrow key
5 Alarm indicator
11 Enter key
6 Display