Hach-Lange SI792 D, SI792x D, SI792x D-FF, SI792x D-PA User Manual - Manual (Page 46)

Operation—Foundation Fieldbus
44
6.1.2 Configuration menu
Select signal level
ln.rnGE
Hi level (default)
Lo level
Select the sensor
ln.SnSR
Type A (default). See Table 1 on page 9 .
Type B. See Table 1 on page 9 .
Select process medium (O
2
dissolved (DO) / gas (GAS)
ln.FCT
DO (default) ln.UnIT
% (default)
mg/L
µg/L
ppm
ppb
GAS ln.UnIT
ppm (default)
%
Select filter time
ln.FtME
0000–0120 SEC (default: 0000 SEC)
Select temperature unit
tc.UnIT
°C (default)
°F
Select temperature sensor
tc.rTD
22 NTC (default)
30 NTC
Select polarization voltage
Co.UPOL
–1000–0 mV (default: –0675 mV)
Select pressure unit
Co.UnIT
BAR (default)
kPa
PSI
Select pressure correction