Hach-Lange EVITA OXY User Manual - Manual (Page 14)

12
Press the add-on module forward as far as possible.
See fi g. 17. Avoid touching the pc board and the
sockets. The add-on module has now been installed and
the signal converter is ready to be installed on the
terminal box. The menus related to the optional
add-on module will automatically become visible
and electrical inputs and outputs are automatically
established by power on. Unpack the add-on module and locate it in the bot-
tom of the signal converter as shown in fi g. 16.
Fig. 16 Fig. 17 Fig. 18
Optional add-on module USC 6000/7000