Hach-Lange EVITA OXY User Manual - Manual (Page 28)

26
If other settings are wanted, the factory settings can
be changed as shown below.
Fig. 35
Setting of the displays and current outputs units
for oxygen and temperature can be done in “Basic
settings”. Setting of the transmitter’s measuring
range for oxygen can be done by changing the value
at 4 mA and the value at 20 mA.
Setting of oxygen/temperature units and transmitter’s current output
However the setting of current outputs range for
oxygen and temperature is done as shown in fi g. 36,
p. 27 and fi g. 37, p. 28.