Hach-Lange EVITA OXY User Manual - Manual (Page 32)

30
Output
USC
I out 1
USC
Timer interval
000. h
RELAY 1
1-999 hours
Active time
00 min
RELAY 1
1-59 min
Relay at
active Open
RELAY 1
Open/Closed
Relay at
warning Open
Open/Closed
Function
Error
RELAY 1
RELAY 1
Relay at
error Open
RELAY 1
Open/Closed
RELAY 1
Setpoint
050.00 mg/l
RELAY 1
0 - 999.99
Hysteresis
005.00 mg/l
RELAY 1
0 - 999.99
Relay above
limit Open
RELAY 1
Open/Closed
Relay 1
USC
Relay 2
USC
Relay 3
USC
~~
Relay below
limit Open
RELAY 1
Open/Closed
081R9415.02.02
Relay 4
USC
Relay 5
USC
Function
Off
RELAY 1
One transmitter
All Errors
All Warnings
Timer
Off
Relay at
warning Open
Open/Closed
RELAY 1
Relay at
Error Open
RELAY 1
Open/Closed
Select
transmitter no. 00
RELAY 1
00-15 Error
Warning
Hi Limit
Lo Limit
Cleaning
Oxygen
Temperature
Value
Oxygen
Setpoint
035.00 ºC
RELAY 1
Hysteresis
005.00 ºC
RELAY 1
0 - 999.99 0 - 999.99
* *
* *
Cleaning interval
000. h
RELAY 1
Cleaning time
00 min
RELAY 1
Relay at
cleaning Open
RELAY 1
1-999 h 1-59 min Open/Closed
**
USC 7000 relay output settings
Setting of relay outputs 1 to 5 on USC 7000 * Units selected in “Transmitter basic setting”, fi g. 35, p. 26.
** To allow the current output to stabilise after a cleaning, the
USC locks the current output during “Cleaning time” and
additional 10 minutes.
Fig. 39
Same as Relay 1 Same as Relay 1 Same as Relay 1 Same as Relay 1
Same as Hi Limit