Hach-Lange EVITA OXY User Manual User Manual

Page 15

Advertising
background image

13

Unpack the add-on module and locate it in the
bottom of the signal converter as shown in fi g. 19.

Press the add-on module forward as far as possible.
See fi g. 20. Avoid touching the pc board and the
sockets.

The add-on module has now been installed and
the signal converter is ready to be installed on the
terminal box. The menus related to the optional
add-on module will automatically become visible
and electrical inputs and outputs are automatically
established by power on.

Fig. 19

Fig. 20

Fig. 21

Optional add-on module USC 6000/7000 19” version

Advertising
See also other documents in the category Hach-Lange Equipment: