Hach-Lange Sigma SD900 Portable - Manual (Page 17)

15
Section 3 Installation
CAUTION
Only qualified personnel should conduct the tasks described
in this section of the manual.
WARNING
Explosion hazard. This product is not designed for hazardous
locations where combustible environments may exist.
3.1 Unpack the sampler
The sampler can be set up for single-bottle or multiple-bottle
collection. The components for each configuration will vary (see
Figure 4 for single-bottle or Figure 5 on page 17 for multiple-bottle
collection).
Check the sampler packages for the following components:
• Sampler—includes cover, base and midsection with controller
and distributor or full bottle shut-off
• Bottle(s)—1, 2, 4, 8 or 24
• Power source—battery or AC power supply
• Pump tubing—replacement
• Sample intake tubing—vinyl or Teflon-lined
• Silicone grease packet—for desiccant maintenance
• Strainer—stainless steel or Teflon/stainless steel
• User documentation