Hach-Lange Sigma SD900 Portable - Manual (Page 26)

24
Installation
4. To keep samples cool, fill the sampler base with ice after the
bottles are in place.
Note: The time that it takes the ice to melt varies with the amount of
ice used, the external temperature and sample temperature.
5. Place the midsection over the base, program the sampler and
install in the field.
3.3.3.4 24 bottle installation
Use 24 bottles to collect samples into 350-mL, 575-mL or
1-liter bottles.
Prerequisites:
• 24 plastic or glass bottles
• Retainer
Note: Refer to Figure 2 on page 9 to make sure that the correct sample
bottles are used with the correct sampler base and retainer.
Figure 10 Eight bottle installation
1 Standard sampler base (Cat. No. 8976) 5 950-mL glass bottles (8x)
2 1.9-L glass bottles or 2.3-L plastic bottles (8x) 6 Retainer bottom (Cat. No. 2347)
3 Retainer (Cat. No.1422) 7 Compact sampler base (Cat. No. 8975)
4 Retainer top (Cat. No.2347)