Hach-Lange Sigma SD900 Portable - Manual (Page 40)

38
Sampler operation
4.4.3 Modify a program
Use the modify selected option to change an individual parameter
for the currently loaded program.
Procedure:
1. Select PROGRAM SETUP > MODIFY SELECTED .
2. The selected parameters are grouped within the following
subheadings. Select one of the available subheadings using
the up and down arrow keys.
• Bottles—quantity and volume
• Intake tubing—length and type
• Program delay
• Sample pacing/collection—time or flow based
• Sample distribution—for multiple bottle sampling
• Liquid sensor—enable/disable
• Sample volume—enter volume
• Intake rinses—enter number
• Sample retries—enter number
• Site ID—enter ID
• Advanced sampling
3. Change the parameter as shown in section 4.2.3 on page 34 .
4.4.4 Review a program
Use the review option to view the selected parameters without
making any changes to the program.
Procedure:
1. Select PROGRAM SETUP > REVIEW from the main menu.
2. Press ENTER to view each entry.
Figure 20 Two samples per bottle (left) vs. two bottles per sample (right)