5 electrical installation, Installation – Hach-Lange Sigma SD900 Portable User Manual
Page 30
Advertising
28
Installation
5. Place the intake tube and strainer in the main stream of the
sample source where the water is turbulent and well-mixed.
Make sure that the intake tube does not have kinks or loops.
3.5 Electrical installation
Connect cables to the controller as shown in
Figure 14
for the
following components:
•
Power (
•
Flow meter or other device (
)
•
Communications (
)
Figure 13 Intake tubing installation
1
Strainer
3
Strain relief
2
Intake tubing
4
Liquid sensor
Advertising