Maintenance – Hach-Lange Sigma SD900 Portable User Manual
Page 65
Advertising
63
Maintenance
Procedure:
1. Unscrew and remove the desiccant holder from the controller
(
Figure 26
).
2. Remove the plug from the end of the desiccant tube (
and discard the spent desiccant.
3. Fill the desiccant tube with fresh desiccant.
Note: Fresh desiccant should be yellow.
4. Replace the plug.
5. Apply grease to the O-ring (
6. Replace the desiccant tube in the controller.
Figure 26 Side view of controller—pump and desiccant
1
Desiccant window
2
Peristaltic pump
Figure 27 Desiccant holder
1
Plug
3
O-ring
2
Desiccant tube
Advertising