Slide gate protection, Reverse loop automatic exit loop, Reverse loop – Controlled Products Systems Group 9000-080 User Manual

Page 11: Warning signs, Warning sign, Separate pedestrian walkway

Advertising
background image

9000-065-F-9-10

9

Slide Gate Protection

Reverse

Loop

Automatic

Exit Loop

Minimizes the
potential of the
gate closing when
a vehicle is
present. Number
and placement of
loops is dependent
on the application.

Reverse

Loop

Minimizes the
potential of the
gate closing when
a vehicle is
present. Number
and placement of
loops is dependent
on the application.

(Optional) will
provide an open
command to the
gate operator(s)
when a vehicle
is exiting the
property.

Warning Signs

Permanently mounted
and easily visible from
either side of the gate.

Warning Sign

Secure Side of Gate

See pages 27-30 for typical layout locations.

Non-Secure Side of Gate

Moving Gate Can Cause
Serious Injury or Death

KEEP CLEAR! Gate may move at any time
without prior warning.
Do not let children operate the gate or play
in the gate area.
This entrance is for vehicles only.
Pedestrians must use separate entrance.

Moving Gate Can Cause
Serious Injury or Death

KEEP CLEAR! Gate may move at any time
without prior warning.
Do not let children operate the gate or play
in the gate area.
This entrance is for vehicles only.
Pedestrians must use separate entrance.

Separate

Pedestrian

Walkway

Located so pedestrians
cannot come in contact
with the vehicular gate.

Non-Contact Sensors (Photo Sensors)

Contact Sensor (Reversing Edges)

1

1

2

A

A

Minimizes the potential of the gate closing on
vehicular or other traffic that loops cannot sense.

Minimizes the potential of the gate closing on
vehicular or other traffic that loops cannot sense.

Installed on the fence to help minimize the potential of
entrapment between the gate and fence. A filler post or
barrier may need to be installed between fence and gate.

B

C

B

C

Helps minimize the potential of entrapment during
the back travel (Opening) of the gate.

Helps minimize the potential of entrapment during
the back travel of the gate.

Entrapment protection devices are required to reduce the risk of injury.
Install sensors where the risk of entrapment or obstruction exists while
gate is moving. Individual requirements will vary.

Closed Gate

Fence

Fence

2

Advertising
This manual is related to the following products: